Tank volume:3 m3 Load: 5 tons Wheelbase:2700mm Chassis:Dongfeng,4x2 Transporting cargo:Edible liquids, chemical liquids requiring special protection, oil products such as gasoline, diesel oil, crude oil, lubricating oil and coal tar,etc. Emission standard: EURO3/EURO4/EURO5 Condition:Brand new Origin:Suizhou,Hubei,China
Product Description
Performance and Features of the Dongfeng Small Mobile Refueling Dispenser Tank Truck:
(1)、Precautions before use:
1.Check if the rear static grounding strip is in contact with the ground and if all equipment is in good condition.
2、Insert the anti-static pole into damp ground to prevent static electricity from igniting.
3、Check if the clutch lever, power take-off lever, or control valve switch are in the correct position, and if the throttle is set to minimum. Ensure that all ball valve handles are in the correct position.
4、Check the lubricating oil level in the pump gearbox and add gear oil if necessary.
5、When there is no liquid in the pump, pre-fill the pump body with guide liquid. For the first use of a new vehicle, guide liquid must be added to prevent dry running and damage to the pump body.
6、Check if the discharge pipeline, discharge valve, and transfer pipe are empty and clean, ensuring that all pipes are suitable for loading and unloading materials.
7、If liquids need to be pumped out, keep rotating equipment away from the tanker to prevent entanglement. When the liquid is pumped out completely, stop the pump and then close the valve.
8、In case of emergency, promptly close the emergency control valve for cutoff.
9、If pumping in or adding material from the top manhole of the tank, have someone monitor the liquid level inside the tank to prevent overflow and ensure there is sufficient space for expansion.
10、Use parking brakes and secure the wheels with triangular wedges before loading or unloading.
(2)、Operating instructions:
1、All one-way valve handles should be opened in the direction of the pipeline and closed at a 90-degree angle to the pipeline.
2、Open the working valve first before engaging the power take-off.
3、After work is completed, close the power take-off first, and then close the working valve.
4、When the temperature is below zero, open the bottom drain plug of the pump to drain any remaining liquid to prevent the pump body from freezing and cracking.
5、Engaging or disengaging the power take-off should be done at idle speed when the pressure gauge reaches.
6、When loading or unloading with the pump, open the top tank cover.
Before using this mobile refueling dispenser tank truck, make sure all valves are closed.
Features:
- Compact and versatile design for maximum efficiency and convenience
- High-quality tank truck for transporting fuel with ease and precision
- Reliable solution for all refueling needs
- Ideal for a variety of scenarios, perfect for on-the-go refueling operations
Applicable Groups:
- Trucking companies
- Construction companies
- Mining operations
- Fleet management companies
- Agriculture industry
Applicable Scenarios:
- Refueling trucks on construction sites
- Providing fuel for mining equipment in remote locations
- Fleet refueling for transportation companies
- Agricultural machinery refueling on farms
Cost Performance:
- Affordable and cost-effective solution for refueling operations
- Saves time and money with efficient fuel transportation
- Long-lasting durability for extended use
- Low maintenance requirements for added cost savings
Invest in the Dongfeng Small Mobile Refueling Dispenser Tank Truck and enhance your refueling operations with ease and efficiency. This versatile vehicle is perfect for various industries and scenarios, providing a reliable solution for all your refueling needs. Maximize productivity and cost-effectiveness with this high-quality tank truck that is built to last. Upgrade your fleet with the Dongfeng Small Mobile Refueling Dispenser Tank Truck today!
Dongfeng Small Mobile Refueling Dispenser Tank Truck |
|
Vehicle parameters |
|
vehicle model |
CL5040GJY6BWG |
Overall Dimension(mm) |
5280×2000×2250mm |
Tank dimension(mm) |
3100×1250×850mm |
The total mass(kg) |
4495kg |
Curb Weight(kg) |
2950kg |
Tank volume |
3m3 |
Loading tonnage |
5 Tons |
Number of compartments |
1 compartments(Optional) |
Tank Material |
Q235B Carbon Steel, 4.5mm thickness |
Other Equipments |
Dispenser, fueling gun, fueling hoses and reels, fuel level machine, two European standard holes on the top of the tank, one new standard submarine valve (voice alarm system), one set of lower oil loading (unloading valve, oil vapour recovery, anti-spill probe, anti-static reel). With special oil pump (can be pumped in and out), rear ladder, manual guardrail, tool box, rear bumper, side guardrail are all made of aluminium alloy plate, tank test report, according to the new standard, other manufacturer standard. |
Chassis parameters |
|
Chassis brand |
Dongfeng |
Drive type |
4x2 |
Number of axle |
2 |
Tire Specifications |
6.50R16LT 10PR |
Number of tires |
6+1 |
Wheelbase(mm) |
2700mm |
Front overhang(mm) |
1045mm |
Rear overhang(mm) |
1535mm |
Transmission |
5 gears |
Maximum speed(km/h) |
85km/h |
Engine parameters |
|
Engine model |
(Other engines are also available) |
Horse power(hp) |
131 hp |
Type of fuel |
diesel |
emission standard |
Euro 5 |
Emissions(ml) |
2300ml |
Email: clw-group@foxmail.com
Mob.: +86 132 3551 1185
WeChat: +86 132 3551 1185
Skype: +86 132 3551 1185
Whatsapp: +8613235511185
Add.: Chengli Automobile Industry Park, Suizhou City, Hubei Province, China
Sign In