Home > Chemicals > ALUMINUM ALLOY 1235

ALUMINUM ALLOY 1235

With a minimum content of 99.35%, Aluminum Alloy 1235 has become the most common foil alloy on the market today. It’s fairly high aluminum content makes it an excellent alloy for a variety of industrial and food service markets. In the annealed states, it’s very malleable allowing for easy workability and formability. A very similar alloy to 1145 as it contains almost the exact same chemical compo

Product Description

Standard Specifications: QQA-1876, ASTM B209

 

ASTM Standards: B209
Finish: Standard Finishes
QQA Standards: 1876
Temper: Standard Tempers
Thickness: 0.0005 to0.064 in
Width: 0.375 to 60 in

 

Aluminum (Al): 99.35%
Chromium (Cr): -
Copper (Cu): 0.05%
Iron (Fe): -
Magnesium (Mg): 0.05%
Manganese (Mn): 0.05%
Other Total: -
Silicon (Si): 0.65% (Si+Fe)
Titanium (Ti): 0.06%
Zinc (Zn): 0.10%

 

Elongation (H12): 12
Elongation (H14): 9
Elongation (H16): 6
Elongation (H18): 5
Tensile Strength (Annealed): ** 13
Tensile Strength (H12): 16
Tensile Strength (H14): 18
Tensile Strength (H16): 21
Tensile Strength (H18): 24
Yield Strength (Annealed): ** 5
Yield Strength (H12): 15
Yield Strength (H14): 17
Yield Strength (H16): 20
Yield Strength (H18): 22
* % in 2 inches
** KSI
 

 

1235 aluminium foil is the aluminium foil of aluminium content not less than 99.35%, Haomei Aluminium can process 0.018-0.5mm thickness of 1235 aluminium foil, because this product has excellent rust resistance, formability, dissolving ability, then it is widely used in cigarette packaging, cable, capacitor, tape, battery foil, flexible packaging, etc.

Rolled in Alloy 1235 with 99.35% minimum aluminum content, our foil slit edges are very clean, resulting in a consistent unwind with minimal breaks.

he advantages of Haomei Aluminum Foil 1235 are:

  1. Strictly control the width and thickness of the finished product, and the thickness up and down is guaranteed to be within 4%;
  2. To ensure the quality of the slice, the end face is aligned, no burr, tower shape, etc.;
  3. Ensure that the tape at the joint does not stick to a layer;
  4. The layout is smooth, no edge, oil spots, black oil spots, bright lines, roller prints, bumps and so on.

Mechanical properties of 1235 aluminium foil:

Alloy Product Type Temper Thickness
(mm)
Tensile  Strength
(Mpa)
Elongation(%)
A100mm
1235 Food and Household Foil O 0.01-0.024 40-100 ≥1
0.025-0.04 45-100 ≥2
0.041-0.07 45-100 ≥4
H18 0.01-0.07 ≥135
aluminium foil for capacitor H18 0.02-0.05 ≥135
aluminium foil for cable O 0.01-0.024 40-100 ≥1
0.025-0.04 45-100 ≥2
0.041-0.07 45-100 ≥4
aluminium foil for adhesive tape O 0.012-0.04 50-90 ≥1
H18 ≥135
O 0.03-0.07 60-100 ≥2
Contact Us

Email: lorsean6988@gmail.com

Mob.: +86 139 3280 8522

Mob.: +86 186 3189 8150

Tel.: +86 318 2878 066

Fax: +86 318 2875 788

Whatsapp: +8618631898150

Add.: Chengdong Industrial Zone, Wuqiang County, Hengshui City, Hebei Province, China 053000

Home Contact us

Sign In

Username :

Password :