Stainless Steel Sheet with vibration Etched
Stainless steel etching sheets are used to chemically etch various patterns onto the surface of stainless steel. With 8K mirror plate, drawing sheet and sandblasting sheet as the base plate, the surface of the object is further processed after etching.
Product Description
Ky Metal is professional etched stainless steel sheets manufacturer and supplier, offering elevator Etched Stainless Steel Sheet, Wall cladding Etched Stainless Steel Sheet, Stainless Steel Etching Sheets,Decorative SS Etched Sheets, SS Colored Etched Sheets
Etched stainless steel sheets are thin plates of stainless steel that have been chemically treated to produce a pattern or design on the surface. With 8K mirror plate, drawing sheet and sandblasting sheet as the base plate, the surface of the object is further processed after etching. Etching version can be processed by a variety of complex processes such as local blending, wire drawing, gold inlaying and local titanium, to achieve the effect of light and dark patterns and brilliant colors.
Stainless Steel Sheet with Etched Finish is widely used in architectural decoration. Especially in the choice of elevator board, the general use of mirror panel as the elevator bottom sheet, and then according to the needs of the pattern processing, so that the overall effect has a three-dimensional sense, reflect its beautification value.
The installation and use of the elevator should consider its value and safety performance. A variety of different patterns etched out of stainless steel, as well as the use of different colors, so that the elevator space is no longer dull, dull, more lively.
Etched Stainless Steel Sheet Specification
|
Surface Finishing |
Etched Finish |
|
Grade |
201, 304, 316L |
|
Color |
Golden, Rose Golden, Bronze, Rose Red, Wine Red, Blue, purple, Black, Green |
|
Thickness |
0.5mm-3.0mm or customized |
|
Width |
1000mm, 1219mm or customize |
|
Length |
2000mm, 2438mm, 3048mm or customize |
|
Standard size |
4'*8ft'(1219*2438mm), 4*10ft(1219*3048mm), 1000*2000mm |
|
Technique |
Cold Rolled Stainless Steel |
|
Package |
PVC protective film+wooden Pallets with waterproof paper and steel strip or as requirement |
|
Delivery time |
15 days after confirming deposit |
|
Payment terms |
T/T, L/C |
|
Application |
Building Interior Exterior Decoration, Partition Screen, Door, Elevator, Lift , Wall Decoration, Cover Panel, Table or decorative surface |
|
Standard |
AISI, GB,SGS |
|
Origin |
BAOXIN, POSCO, TISCO |
|
Note |
We can provide other sizes , pattern and color by customers' requirement |
|
Others |
We also manufacture tube and pipe, Show Shelf, Handle, Handrail, Door, Elevator Cab, Kitchenware, Sanitary Ware etc. with good looking and different color for your option. |
Chemical Composition:
|
Grade |
Chemical Composition (%) |
|||||||
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
|
|
201 |
≤0.15 |
≤1.00 |
5.5/7.5 |
≤0.060 |
≤0.030 |
3.5/5.5 |
16.0/18.0 |
- |
|
304 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
8.0/11.0 |
18.00/20.00 |
- |
|
316 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
10.00/14.00 |
16.0/18.0 |
2.00/3.00 |
|
316L |
≤0.03 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
10.00/14.00 |
16.0/18.0 |
2.00/3.00 |
These contents may help you：
1. The Selection of Thickness and Gauge
The selection of etched stainless steel sheet thickness and gauge depends on the specific application and requirements of the project.
To select the appropriate thickness and gauge for your project, consider the following tips:
Evaluate the maximum load-bearing capacity needed for the material.
Take into account the weight of the final product.
Check for size and weight restrictions of your equipment.
Choose a thickness and gauge that satisfies your requirements while staying within equipment weight limitations.
Seek advice from the King Yang Metal before making a final decision.
Keep in mind that thicker sheets require more effort to move and may be more challenging to work with, whereas thinner sheets are lighter and easier to handle but may not offer the same level of strength.
2. How to choose size of Stainless Steel Etching Sheets
The standard sizes for stainless steel sheets are 4'*8ft'(1219*2438mm), 4*10ft(1219*3048mm), 1000*2000mm. While the width and length of sheets can be tailored to meet specific requirements, the maximum width is typically 1500mm.
It is important to bear in mind that larger sheets can be challenging to transport and store, so a maximum length of 5000mm is usually recommended for ease of transportation.
If you are unsure about which size to choose, seek guidance from a professional or manufacturer. They can assist you in determining the optimal size for your specific needs.
