The tungsten carbide rods(also named cemented carbide rods) are used in making high-quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer. They can withstand high compressive stresses imposed during cutting, as well as having good wear and oxidation resistance at the high temperatures reached.
Product Description
Tungsten carbide rods are extremely hard and wear-resistant cylindrical bars made of tungsten carbide, which is a composite of tungsten and carbon. These rods are used in various applications, such as in the production of cutting tools, drills, milling cutters, and other tools that require high strength and durability.
A carbide rod with a coolant hole is a type of tungsten carbide rod that has one or more holes drilled along its length to allow for the passage of coolant or lubricant during machining operations. The coolant or lubricant helps to reduce heat and friction, which can cause wear and damage to the cutting tool and workpiece.
Tungsten Carbide Rods without holes: These are solid carbide rods without any coolant holes.
Tungsten Carbide Rods with one straight hole: These rods have a single straight hole drilled along their length to allow for the passage of coolant or lubricant.
Tungsten Carbide Rods with two straight holes: These rods have two straight holes drilled along their length, which allows for better coolant flow and lubrication.
Tungsten Carbide Rods with two 30 degree/40 degree helix holes: These rods have two helix-shaped holes drilled along their length, which allows for improved coolant flow and better chip evacuation during machining operations.
Carbide rods with coolant holes are available in various sizes and shapes, depending on the application requirements. They are typically made using a combination of tungsten carbide powder and a binder material, which is pressed and sintered to form a dense and durable material. These rods are highly resistant to wear and can withstand high temperatures and pressures, making them ideal for use in demanding machining applications.
Product name |
Tungsten Carbide Bod Solid Carbide Rods 330 length cut to short rod |
Brand |
JIMS |
Appllication |
For cutting ,milling,and drilling |
Material |
WC+CO |
Hardness |
≥90.5HRA |
Length |
330mm or customized |
Grades |
YG10X/JF15/JF20/ |
CARBIDE RODS PARAMETERS TABLE
Grade |
WC (μm) |
Co(%) |
Density (g/cm³) |
Hardness (HRA) |
TRS (N/m㎡) |
Recommended Use |
JU06 |
<0.6 |
6 |
14.75 |
94.0 |
3600 |
Composite Machining
|
JF15 |
0.8 |
10 |
14.38 |
92.2 |
3900 |
Stainless Steel, Cast Iron, Titanium Alloy Machining |
JF20 |
0.6 |
10 |
14.45 |
92.3 |
4000 |
Stainless Steel, Cast Iron, Titanium Alloy Machining |
JF25 |
0.6 |
12 |
14.10 |
92.5 |
4000 |
Stainless Steel, Cast Iron, Titanium Alloy Machining |
JF35 |
<0.6 |
12 |
14.05 |
92.8 |
4100 |
Stainless Steel, Cast Iron, Titanium Alloy Machining |
YG10X |
0.8 |
10 |
14.35 |
91.2 |
3600 |
Steel,Cast Iron, Non-Ferrous Metal, Titanium Alloy Machining |
Type | Diameter(mm) | T ol.(mm) | Length | Diameter of hole(mm) | T ol.(mm) | A |
Bφ6xφ1x330 | 6 | +0.30/+0.60 | 330 | 1.00 | ±0.15 | 0.15 |
Bφ7xφ1x330 | 7 | +0.30/+0.60 | 330 | 1.00 | ±0.15 | 0.15 |
Bφ8xφ1x330 | 8 | +0.30/+0.60 | 330 | 1.00 | ±0.15 | 0.15 |
Bφ9xφ1.4x330 | 9 | +0.30/+0.70 | 330 | 1.40 | ±0.15 | 0.20 |
Bφ10xφ1.4x330 | 10 | +0.30/+0.70 | 330 | 1.40 | ±0.15 | 0.20 |
Bφ11xφ1.4x330 | 11 | +0.30/+0.70 | 330 | 1.40 | ±0.15 | 0.30 |
Bφ12xφ1.75x330 | 12 | +0.30/+0.80 | 330 | 1.75 | ±0.15 | 0.30 |
Bφ13xφ1.75x330 | 13 | +0.30/+0.80 | 330 | 1.75 | ±0.15 | 0.40 |
Bφ14xφ1.75x330 | 14 | +0.30/+0.80 | 330 | 1.75 | ±0.15 | 0.40 |
Bφ15xφ2x330 | 15 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 0.40 |
Bφ16xφ2x330 | 16 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 0.40 |
Bφ17xφ2x330 | 17 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 0.50 |
Bφ18xφ2x330 | 18 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 0.50 |
Bφ19xφ2x330 | 19 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 0.50 |
Bφ20xφ2.5x330 | 20 | +0.40/+0.80 | 330 | 2.50 | ±0.25 | 0.50 |
Type | Diameter(mm) | T ol.(mm) | Length | Diameter of hole(mm) | T ol.(mm) | TK(mm) | T ol. | A |
Bφ6x2φ1x330 | 6 | +0.30/+0.60 | 330 | 1.00 | ±0.15 | 3.00 | 0/-0.2 | 0.15 |
Bφ7x2φ1x1.35x330 | 7 | +0.30/+0.60 | 330 | 1.00 | ±0.15 | 3.50 | 0/-0.2 | 0.15 |
Bφ8x2φ1x4x330 | 8 | +0.30/+0.60 | 330 | 1.00 | ±0.15 | 4.00 | 0/-0.3 | 0.15 |
Bφ9x2φ1.4x4x330 | 9 | +0.30/+0.70 | 330 | 1.40 | ±0.15 | 4.00 | 0/-0.3 | 0.20 |
Bφ10x2φ1.4x5x330 | 10 | +0.30/+0.70 | 330 | 1.40 | ±0.15 | 5.00 | 0/-0.3 | 0.20 |
Bφ11x2φ1.5x5x330 | 11 | +0.30/+0.70 | 330 | 1.40 | ±0.15 | 5.00 | 0/-0.3 | 0.30 |
Bφ12x2φ1.75x6x330 | 12 | +0.30/+0.80 | 330 | 1.75 | ±0.15 | 6.00 | 0/-0.3 | 0.30 |
Bφ13x2φ1.75x6x330 | 13 | +0.30/+0.80 | 330 | 1.75 | ±0.15 | 6.00 | 0/-0.3 | 0.40 |
Bφ14x2φ1.75x7x330 | 14 | +0.30/+0.80 | 330 | 1.75 | ±0.15 | 7.00 | 0/-0.3 | 0.40 |
Bφ15x2φ2x7x330 | 15 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 7.00 | 0/-0.3 | 0.40 |
Bφ16x2φ2x8x330 | 16 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 8.00 | 0/-0.3 | 0.40 |
Bφ17x2φ2x8x330 | 17 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 8.00 | 0/-0.3 | 0.50 |
Bφ18x2φ2x9x330 | 18 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 9.00 | 0/-0.3 | 0.50 |
Bφ19x2φ2x9x330 | 19 | +0.40/+0.80 | 330 | 2.00 | ±0.20 | 9.00 | 0/-0.3 | 0.50 |
Bφ20x2φ2.5x10x330 | 20 | +0.40/+0.80 | 330 | 2.50 | ±0.25 | 10.00 | 0/-0.4 | 0.50 |
Product Process
Note: Can offer customized product based on customer requirements.
Sign In