Home > Minerals & Metallurgy > Steel > Stainless Steel > Stainless Steel Sheets > 304/316/430 Stainless Steel Sheet #4 Finish

304/316/430 Stainless Steel Sheet #4 Finish

304/316/430 Stainless Steel Sheet #4 Finish

Product Description

304/316/430 Stainless Steel Sheet #4 Finish

304 Stainless Steel Finish #4 is ideal for decorative purposes such as wall cladding, elevator interiors, kitchen equipment, and other applications where a low-reflective and uniform appearance is desired. It is also used in industries such as automotive, aerospace, and marine, where it provides a durable and corrosion-resistant surface. Satin stainless steel is available in various grades of stainless steel, including 304, 316, and 430, and in a range of thicknesses and sizes to suit different design requirements. 

Number 4 finish stainless steel, commonly referred to as “satin” finish, is the most popular choice for architectural applications.

 

304/316/430 Stainless Steel Sheet #4 Finish Specification:

Grade

201,  304, 316L , 430

Surface finish NO.4, #4, Stain Finish
Color Golden, Rose Golden, Bronze, Rose Red, Wine Red, Blue, purple, Black, Green,etc.
Thickness 0.5mm-3.0mm or customized
Width 1000mm, 1219mm or customize
Length 2000mm, 2438mm, 3048mm or customize
Standard size 4'*8ft'(1219*2438mm), 4*10ft(1219*3048mm), 1000*2000mm
Technique Cold Rolled Stainless Steel
Package PVC protective film+wooden Pallets with waterproof paper and steel strip or as requirement
Delivery time 15 days after confirming deposit
Paymentterms T/T, L/C
Application  Building Interior Exterior Decoration, Partition Screen, Door, Elevator, Lift , Wall Decoration, Cover Panel, Table or decorative surface
Standard AISI, GB,SGS
Origin BAOXIN, POSCO, TISCO
Note We can provide other sizes , pattern and color by customers' requirement
Others We also manufacture tube and pipe, Show Shelf, Handle, Handrail, Door, Elevator Cab, Kitchenware, Sanitary Ware etc. with good looking and different color for your option.

 

Chemical Composition:


Grade
Chemical Composition (%)
C Si Mn P S Ni Cr Mo
201 ≤0.15 ≤1.00 5.5/7.5 ≤0.060 ≤0.030 3.5/5.5 16.0/18.0 -
304 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.03 8.0/11.0 18.00/20.00 -
316 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.03 10.00/14.00 16.0/18.0 2.00/3.00
316L ≤0.03 ≤1.00 ≤2.00 ≤0.045 ≤0.03 10.00/14.00 16.0/18.0 2.00/3.00

 

 

Faq:

1. What is Satin Finish?

Satin stainless steel is a type of finish that is achieved by mechanically polishing the surface of stainless steel to create a consistent and even grain pattern. The satin finish is similar to the hairline finish, but it has a slightly more reflective appearance and is less textured than the hairline finish.This finish has a low-reflective appearance that is less reflective than a mirror finish.

2. How does No.4 stainless steel differ from other finishes, like No.8 or mirror finish?
No.4 stainless steel has a brushed satin appearance with a non-reflective finish. In contrast, No.8 or mirror finish stainless steel has a highly reflective and mirror-like surface. The choice between the two finishes depends on the desired aesthetics and the level of reflectivity needed for the specific application.

3. How do I clean and maintain No.4 stainless steel with a satin finish?

To clean No.4 stainless steel with a satin finish, use a mild soap or detergent and warm water with a soft cloth or sponge. Avoid using harsh abrasives, steel wool, or scouring pads, as they can scratch the surface. After cleaning, rinse thoroughly with clean water and dry with a soft cloth to prevent water spots or mineral deposits.

Home Contact us

Sign In

Username :

Password :